Back to: Do & Grow – Siemens
Your company has taken on a contract to develop a sequence for a testing unit. The testing unit is a basic pressure testing, free standing unit.
All requirement details are contained in a PDF Document attached below
Additional Notes
- The language for the sequence has not been specified, you are free to do what you wish
- OPC UA is a requirement, there will be Tips / Pointers this month around OPC UA to help those who have not used OPC UA yet. Including the use of UA Expert to test read/write (If you have access to PLC SIM Advanced, if not, the posts will explain the process anyway so you still gain the knowledge)
- You are starting with a blank project and will need to select the Hardware based on the requirements in the document attached
- Use Discord to ask for support!
- A new channel (july-2022) has been created for discussion
Good luck! If you get stuck, spot an issue or have any other questions at all, speak up and let me know, I’ll do my best to resolve anything!